Hyperopia featured image

The Optics of Vision – Lesson 7: Hyperopia

This is lesson 7 in this course. Please review lessons 1-6 if you haven’t already done so.

Hyperopia

What is Hyperopia?

Hyperopia, or hypermetropia, is the refractive condition that results when the focal point of parallel light entering the eye forms behind the retina.

The word hyperopia is the name of the condition and the word hyperopia is used to describe somebody with hyperopia. I.e., She has hyperopia, she is hyperopic.

A more common word for hyperopia is farsightedness. The word farsightedness is the name of the condition and farsighted is used to describe someone who has farsightedness. I.e., He has farsightedness, he is farsighted.

Here’s what hyperopia looks like in a ray diagram:

Ray Diagram of Hyperopia

The above diagram decpicts a cross section of an eye with the focal point forming behind the retina. This is just a helpful way of visualizing hyperopia, but in reality, the focal point never actually has a change to form. The light rays are acutally stopped an absored as soon as they hit the retina.

The point is that the light rays are not in focus when the hit the retina, and should they have been able to keep going, the focal point would eventually have formed behind the retina.

Just like in myopia, hyperopia exists in varying degrees of severity. It can be very low or very strong as you can see here:

3 Different Stages of Hyperopia

The reason for the focal point forming behind the retina in hyperopia is that the cornea does not converge the light entering the eye enough.

Recall from Lesson 3 that lens power and the focal distance are linked in the following way:

The higher the lens power, the shorter the focal distance.

The lower the lens power, the longer the focal distance.

In the case of hyperopia, the focal distance is too long. To shorten the focal distance, we have increase the lens power.

How do we increase the lens power of the cornea? Well we cann change the shape of the cornea itself, so we have to add lenses in front of it.

Recall from Lesson 5 that the cornea acts as a plus (converging) lens. Theefore, in order to increase the overall power of the eye, we will have to add more plus (convering) lenses in front.

*Note that to correct hyperopia, we are doing the exact opposite as what we do to correct myopia.

To illustrate how adding plus (converging) lenses in front of an eye helps correct hyperopia, let’s consider the following example.

Ray Diagram of Hyperopia with Figures

In this example, we see parallel light coming from optical infinity, we see that the cornea has a power of +0.50D, the length of the eye is 1.8cm (0.018m) and the focal point is 0.2cm (0.002m) behind the retina.

The question is; what lens power needs to be placed in front of the eye in order for the focal point to land exactly on the retina.

Ray Diagram of Hyperopia Corrected by Mystery Plus Lens

Let’s start by establishing the goal. The goal is to have the focal point on the retina. The retina is 1.8cm behind to the cornea. So what total lens power do we need for that?

The formula for lens power is:

lens power = 1 / focal distance

In this example we want the focal distance to be 1.8cm (because that’s how far the retina is from the cornea).

lens power = 1 / 0.018

lens power = +55.5D

This means that for the focal point to be on the retina, the cornea must have a lens power of +55.5D. But it only has a lens power of +50D, not +55.5D, so what do we do?

Well, since the cornea is missing +5.5D of converging power, we will add an plus (converging) lens in front of the cornea with a power of +5.5D!

Calculations

Total Power Needed = Power of the Cornea + Power of Glasses Needed

+55.5D = +50D + Power of Glasses Needed

Power of Glasses Needed = +55.5D – (+50D)

Power of Glasses Needed = +5.5D

Ray Diagram of an Emmetropic Eye With CorrectiRay Diagram of an Emmetropic Eye With Corrective Lensve Lens

So in this example, with a +5.5D plus lens in front of this eye, the light is perfectly focused on retina!

Just like in our example from Lesson 6, this is not exactly how optometrists figure out what lenses will make the vision better. They don’t know what the length of the eye is so these calculations are not possible in the exam room. Instead, they just test different powered lenses in front of the patient’s eyes until they find the one which gives the best vision (… in a nutshell).

Pop Quiz!

Ok, now that we have a better undesrstanding of hyperopia, try to answer this question based on everything you know so far.

Why do farsighted people (people with hyperopia) have more difficulty seeing up close than in the distance?

Hint: Think of how light behaves when it comes from a distance vs when it comes from up close.

Leave comment below to find out the answer!

We have now learned a lot of theory in this course. If you have any questions about any of the material so far it’s very important that you clear it up before the next lesson. You can leave your questions in the comments section of any of the lessons.

The reason I bring this up is because the next lesson will really test your understand of the concepts we’ve learned so far. It’s one of the most difficult refractive conditions to grasp and the vast majority of people have no idea what it is. I’m talking about astigmatism. So get prepared, and then move onto Lesson 8!

==>The Optics of Vision – Lesson 8: ASTIGMATISM <==

Lens Power - Featured Image

The Optics of Vision – Lesson 3: Lens Power

Now that we understand light and lenses, we will be learning about how to quantify the effect that lenses have on light. This is the concept of lens power and it will put us well on our way to understand vision and glasses work.

To understand the concepts covered in this lesson, it is best to have read:

Now let’s begin!

Lens Power

What is Lens Power?

The power of a lens is also often referred to as the strength of a lens. It refers to how much of an effect a lens has on light passing through it.

A lens with high power has a big effect on the path of light passing through it and a lens with low power has a small effect.

What Determines Lens Power?

The main determinant of lens power is the curvature of the lens.

The more curved a lens’ surface is, the more power it has and the more it will change the direction of light.

Insert Image

What Types of Lens Powers Are There?

Recall from Lesson 2 that lenses can either be converging (+) or diverging (-).

  1. Converging lenses have converging or plus power 
  2. Diverging lenses have diverging or minus power

Plus Power

The following diagram will illustrate the concept of plus power.

It shows 3 different converging lenses, each with a different curvature.

The most curved lens has the most power and changes the direction of light the most.

The least curved (flattest) lens has the least power and changes the direction of light the least.

Convex lenses Different powers - Curves

Minus Power

The next diagram will illustrate the concept of minus power.

It shows 3 different diverging lenses, each with a different curvature.

Again, the most curved lens has the most power and changes the direction of light the most.

The least curved (flattest) lens has the least power and changes the direction of light the least.

Concave Lenses Different Curves

Can you see that in both diagrams, the most curved lens ‘bends’ the light rays the most and the least curved lens ‘bends’ them the least? That is the result of each lens having a different power/strength, which is based on the curvature of the lens.

Now, in the real world, we need a way of describing the exact curvatures of lenses. We can’t just say ‘high curve’, ‘moderate curve’, or ‘low curve’ to describe lenses. That is not accurate enough.

Next, we will learn exactly how lens power is measured and quantified.

How is Lens Power Measured?

It has to do with something called the focal distance of the lens. Let’s learn more about focal distance before we delve into lens power.

Focal Distance of a Plus Lens

Recall from Lesson 1 that converging light eventually forms something called a focal point.

ray diagram of converging light, focal point, and diverging light
Figure from Lesson 1

We’ve also learned from Lesson 2 that plus lenses cause incoming parallel light to become converging.

Ray diagram of parallel light passing through a convex lens
Figure from Lesson 2

So if plus lenses cause light to converge and converging light forms a focal point, then every plus lens will create a focal point.

Let’s re-examine the following diagram. This time, note how the focal point for each lens is formed at different distances from the lenses themselves.

Convex lenses Different powers - Focal Point

The distance from the lens to the focal point is called the focal distance.

Focal Distance of a Minus Lens

Just like plus lenses, minus lenses also form focal points. There’s just a small difference.

Remember that minus lenses cause light to diverge, meaning that once the light passes through a minus lens, the light rays move further and further apart from each other.

Now at this point, you may be wondering… If a focal point happens when all the light rays come together, then how can diverging light ever come to a focal point? That’s a great question!

In fact, the focal point doesn’t happen after the light passes through the lens, it happens before.

To find where the focal point is on a minus lens, you have to extend each of the light rays exiting the lens backward until they all meet.

The Focal Point of a Concave Lens

We can do this with any minus lens. Let’s see what it looks like with our 3 minus lenses from earlier. Also note here that distance between the focal point and the lens increases as the lens gets flatter, just as it did with plus lenses.

Concave Lenses Different Powers With Focal Point and Distance

Again, just as with plus lenses, the distance between the focal point and the lens is called the focal distance.

Calculating Lens Power From Focal Distance

The power of any lens is based on its focal distance. To be more precise, the power of a plus lens is the inverse of its focal distance.

The power of a lens is the inverse of its focal distance.

What does this mean? Don’t worry, it’s not difficult!

In mathematical terms, the inverse of ‘something’ means dividing 1 by that ‘something’.

In this case, I said that the power of a plus lens is the inverse of its focal distance. The inverse of the focal distance means 1 divided by the focal distance. Therefore, lens power = 1 / focal distance.

Lens Power = 1 / Focal Distance

See, simple right?

Now there’s just one last thing to remember. When calculating lens power, we must use meters when measuring the focal distance. This produces a unit called Diopters, and that’s what lens power is measured in!

This will make a lot of sense when we start looking at examples.

We’re going to use the same diagrams as before but now we will assign some values to the focal distance so we can calculate the lens power.

Calculating Plus Lens Power

Convex lenses Different powers - Focal Distances

Let’s calculate the lens power of each lens in the diagram.


Top Lens

Example of a plus 5D lens small

The focal length is 0.20m.

The equation we’re using is:

Lens Power = 1 / Focal Length

The Calculation is:

Lens Power = 1 / 0.20m = +5D


Middle Lens

Example of a plus 2D lens smallThe focal length is 0.50m.

The equation we’re using is:

Lens Power = 1 / Focal Length

The Calculation is:

Lens Power = 1 / 0.50m = +2D


Bottom Lens

Example of a plus 1D lens smallThe focal length is 1m.

The equation we’re using is:

Lens Power = 1 / Focal Length

The Calculation is:

Lens Power = 1 / 1m = +1D


That was easy right?

Let me just point out 2 things before we move onto minus lenses.

  1. No conversions were necessary because all values were already in meters. If I had given the values 20cm, 50cm and 100cm, we would have had to convert them to meters before we did the calculations.
  2. Because we were calculating the power of a plus lens, by convention we must include a plus sign in front of the lens power.

Calculating Minus Lens Power

Calculating the power of minus lenses may seem more complicated, but it’s the exact same steps.


Top Lens

Minus 8 diopter concave lens

The focal length is 0.125m.

The equation we’re using is:

Lens Power = 1 / Focal Length

The Calculation is:

Lens Power = 1 / 0.125m = -8D


Middle Lens

Minus 3 diopter concave lens

The focal length is 0.333m.

The equation we’re using is:

Lens Power = 1 / Focal Length

The Calculation is:

Lens Power = 1 / 0.333m = -3D


Bottom Lens

Minus 1 and half diopter concave lens

The focal length is 0.666m.

The equation we’re using is:

Lens Power = 1 / Focal Length

The Calculation is:

Lens Power = 1 / 0.666m = -1.5D


Again, keep in mind these 2 things when calculating lens power.

  1. No conversions were necessary for the examples above because all values were already in meters. If I had given the values 12.5cm, 33.3cm and 66.6cm, we would have had to convert them to meters before we did the calculations.
  2. Because we were calculating the power of minus lenses, by convention we must include a minus sign in front of the lens power.

Key Points to Remember:

  • Every lens (plus or minus) has a focal point
  • The distance between the focal point and the lens is called the focal distance
  • The formula for lens power is the same for plus or minus lenses:

Lens Power = 1 / Focal Distance

  • The power of plus lenses are always denoted with a + (plus sign)
  • The power of minus lenses are always denoted with a – (plus sign)

This lesson may take a few reads to really set in. If you still have questions about the material, feel free to leave them in the comments section and I will post some additional clarifications for you.

Great job making it this far into the course! This may be a good time to review Lessons 1,2 & 3 because in Lesson 4 we will switch gears and start learning about eye anatomy!

==> The Optics of Vision – Lesson 4: Introduction to Eye Anatomy <==

Introduction To Lenses - Featured Image

The Optics of Vision – Lesson 2: Introduction to Lenses

In this lesson, we will be learning about what lenses are and how they affect the path of light rays. Understanding lenses will be crucial in understanding how the eyes produce vision as well as how glasses work.

To understand the concepts covered in this lesson, it is best to have read:

==> The Optics of Vision – Lesson 1: Understanding Light <==

Now let’s begin!

What is a lens?

Let’s start with a dictionary definition:

A piece of glass or other transparent substance with curved sides for concentrating or dispersing light rays.

The above definition touches upon the 2 critical properties of lenses:

  1. They must be transparent
  2. They must be curved

If either one of these criteria are not met, you do not have a lens.

For example:

Would a window be considered a lens?

A window is not a type lensNo. Although windows meets the first criterion of being transparent, they are flat (meaning they have no curvature) therefore they are not lenses.

Would a cereal bowl be considered a lens?

A bowl is not a type of lens  No. Although cereal bowls are curved, they are not transparent (light does not pass through them) therefore they are not lenses.

Would a magnifying glass be a considered a lens?

A magnifying glass is a convex lensYes! A magnifying glasses is transparent and its surfaces are curved therefore it acts as a lens.

Of course, a magnifying glass is just one example of one type of lenses. Lenses come in all different shapes and sizes and they are used in countless different applications.

Lenses in Ray Diagrams

In Lesson 1 we learned what light rays and ray diagrams are. Now let’s add a lens into a ray diagram and see how it affects light rays.

First, let’s reiterate the 2 key properties of lenses and see what happens if either of them is missing.

Here is a ray diagram showing passing through a flat ‘lens’.

Ray diagram of a flat lens

Here is a ray diagram showing what happens to light attempting to pass through an opaque ‘lens’.

Ray diagram of an opaque lens

Now if we have a proper lens, one that is transparent and curved, and we pass some light rays through it, the lens will affect the path of the light rays.

Ray diagram of parallel light passing through a convex lens

As you can see from the example, the lens causes the light rays to change directions.

Of course, not all lenses have the same effect of light. There are sorts of different lenses that affect light in many different ways. For the rest of this lesson, we will focus mainly on the types of lenses used in glasses.

They are:

Convex

Concave

A Convex Lens A Concave Lens

An easy way to remember which is which:

 

Mnemonic ow to remember convex and concave lenses

Now let’s explore how each type of lens affects incoming light rays.

Until more advanced lessons, for simplicity, we will always consider incoming light that is parallel.

Convex Lenses

Convex lenses add vergence to light that passes through them.

If you’re not familiar with what light vergence is, please review Lesson 1.

Recall that parallel light has zero vergence. So if you take the light with zero vergence and you add vergence to it, the result is light with positive vergence.

Also, recall that light with positive vergence is called converging light.

Therefore, the result of passing parallel light through a convex lens is converging light.

Ray Diagram of a Convex Lens

Yes, another name for a convex lens is a converging lens. They mean the exact same thing. But if that wasn’t enough, there’s also another name for them!

Because convex/converging lenses increase the vergence of light, they are also called + (plus) lenses.

Convex

Describes the shape of the lens

Converging

Describes the lens’ effect on light

+

Simple notation

Concave Lenses

Convex lenses decrease the vergence of light that passes through them.

Again, recall that parallel light has zero vergence. So if you take the light with zero vergence and you decrease its vergence, the result is light with negative vergence.

Also, recall that light with negative vergence is called diverging light.

Therefore, the result of passing parallel light through a concave lens is diverging light.

Ray Diagram of a Concave Lens

Now you know that concave lenses are also known as diverging lenses because they cause parallel light to diverge. Another way looking at it is that concave lenses decrease the vergence of light. Because of this, they are also known as – (minus) lenses.

Concave

Describes the shape of the lens

Diverging

Describes the lens’ effect on light

–

Simple notation

Summary

Lenses must be made of transparent materials and must have a curved surface. Being transparent allows light to pass through them, and the curved surfaces cause the light passing through to change direction.

Glasses primarily use two different types of lenses. They are convex and concave.

Convex lenses cause parallel light passing through them to become convergent and concave lenses cause parallel light passing through them to become divergent.

Though the terms convex/concave and converging/diverging are useful in understanding the lenses, in the day-to-day operations of an optical shop, eye doctor clinic, lens manufacturing lab, etc., they are referred to simply with a + (convex/converging) or – (concave/diverging) sign.

Now that we are familiar with the two main types of lenses, we will begin to explore the concept of lens power.

==> The Optics of Vision – Lesson 3: Lens Power <==